Conergy SolarControlPlus

Help Text SolarControlPlus

Registration Page (Login)

This is the monitoring portal Conergy SolarControlPlus brought to you by Conergy Services GmbH.
If you are in the possession of a data logger of the type SunTechnics SunReader 1, SunReader 2 or a Conergy VisionBox, you can use this portal to visualise your performance data. Please, register an account on this site.

Registration

Please choose a username without spaces or special characters.
The password must contain of minimum 10 characters, and has to fulfill these requirements:
Letters [A-Z, a-z], one as capital letter
Digits [0–9],
Special characters [*, !,?,…]

You find the serial number on your data logger. At the sunreader on the front side, at the Visionbox under menue point “INFO” on your display or on the backside as a sticker.

Overall Summary

Here you can find the overview of all devices installed inside your power plant. The single view is shown for every single device, but not for the Sunreader V1 (serial no. DL-NE101-XXXXX)

Irradiation and temperature are measured by installed irradiation sensor on site. These data were sent to the portal. If there is no irradiation sensor installed a flat line is shown in the graphic.

Conergy VisionBox: The data ”Temperature” shows the temperature of the inverter.
SunTechnics SunReader: The data “Temperature” shows the module temperature, delivery by installed sensor.

You can select a period in the timeline by moving the mouse over the desired area and hold down the left mouse button. Then the system zooms in the desired area automatically.
To show the whole period again, click on the symbol on the top right.

Yield

In the standard setting the yield is indicated for the last 30 days

Detail View

Sunreader 1: This view is without function
Sunreader 2, SmartControl: This view can show every inverter individually.
Conergy VisionBox: The entry temperature indicates here the temperature of the inverter.
SunTechnics SunReader: The data “Temperature” indicates the module temperature which is delivered by the installed sensor.

You can select a period in the timeline by moving the mouse over the desired area and hold down the left mouse button. Then the system zooms in the desired area automatically.
To show the whole period again, click on the symbol on the top right.

Logging

The logging shows all announcements of the connected inverters.
All announcements can be cleared using the icon .